How to Use DOVPO Topside Dual

THE TOPSIDE DUAL IS THE NEWEST VERSION OF THE INNOVATIVE TOPSIDE SOUONK MOD THAT IS CREATED BY BRIAN FROM THE VAPOR CHRONICLES YOUTUBE CHANNEL.
THIS GAME CHANGING SOUONK MOD HAS ALL THE INNOVATION FROM THE ORIGINAL SINGLE BATTERY TOPSIDE BUT NOW OFFERS MORE POWER AND EXTENDED BATTERY LIFE. THIS HARD HITTING DEVICE OFFERS 200W OF REGULATED POWER AND USES DUAL IBGGO BATTERIES. THE TOPSIDE DUAL OFFERS A LARGE 10ML SOUONK BOTTLE ELIOUID CAPACITY (BACKWARD COMPATIBLE WITN ORIGINAL TOPSIDE
BOTTLE AND SLED). SIMPLE TOP FILLING AND AN EASY TO USE INTERFACE WHICH MAKES THIS THE PERFECT ADDITION TO THOSE WHO WANT MORE POWER AND EXTENDED BATTERY UFE. POWERFUL AND SIMPLE SDUONKING HAS ARRIVED WITH THE TOPSIDE DUAL.

SPECIFICATIONS

MATERIAL: ZINC ALLOY

SIZE: 54.0 X 42.0 X 88.5MM

POWER RANGE: 5.0W-200W

TEMPERATURE RANGE: 100-315°C/200-600°F


DISPLAY: 0.96″ OLED

INPUT VOLTAGE: 6.4V— 8.4V

OUTPUT VOLTAGE: 0.8V -12.0V

RESISTANCE: 0.08OHM- 3.50OHM

BATTERY: 2 X 18650 HIGH-DRAIN BATTERY
CHARGING: MICROUSB 5V/2A

GOLD-PLATED SPRING LOADED 510 PIN


SILICONE BOTTLES WITH A CAPACITY OF 10ML

WARNING

  1. ENSURE YOU USE ONLY HIGH-DRAIN BATTERIES FOR OPTIMUM PERFORMANCE AND SAFETY.
  2. KEEP OHM’S LAW INTO CONSIDERATION WHEN DETERMINING THE OPTIMUM SETTINGS. DO NOT EXCEED YOUR BATTERIE CAPABILITIES OF MAXIMUM/CONTINUOUS DISCHARGE RATES.
  3. AMPERAGE LIMIT FOR THE TOPSIDE DUAL IS 40A

START VAPING

  1. INSTALL 2 X IBBSO HIGH-DRAIN BATTERIES. MAKE SURE THE POSITIVE AND NEGATIVE ENDS ARE FACING THE CORRECT DIRECTIONS.
  2. POWER ON/DFF: CLICK FIRE BUTTON 5 TIMES QUICKLY TD TURN THE DEVICE ON, REPEAT THE PROCESS TD TURN THE DEVICE OFF.
  3. INSTALL THE BOTTLE CARRIER INTO THE DEVICE.
  4. ATTACH AN TDMIZER TO THE DEVICE, SET YOUR DESIRED
    WATTAGE/VOLTAGE/TEMPERATURE AND START VAPING BY PRESSING THE FIRE BUTTON.
  5. HOLD BOTH FIRE BUTTON AND “-” BUTTON TO ENTER MENU. TO SCROLL MENU OPTIONS. PRESS “-” OR “+” BUTTON. PRESS FIRE BUTTON TO ENTER SUB-MENU OR CONFIRM SETTINGS.
  6. HOLD BOTH “+” AND “-” BUTTONS TO LOCK THE “+” AND “-” BUTTONS. REPEAT THE PROCESS TO UNLOCK.
  7. WHILE “+” AND “-” BUTTONS ARE LOCKED. PRESS “+” BUTTON 3 TIMES QUICKLY TO ENTER “STEALTH MODE”. WHILE IN STEALTH MODE. WHEN PRESSING FIRE BUTTON. THE SCREEN WILL STAY OFF. TO GET OUT OF STEALTH MODE. YOU CAN CLICK “+” BUTTON 3 TIMES QUICKLY. OR UNLOCK ADJUST BUTTONS BY HOLDING “+” AND “-” BUTTONS.

8. TO LOCK THE FIRE BUTTON. CLICK FIRE BUTTON 3 TIMES. REPEAT THE PROCESS TO UNLOCK FIRE BUTTON.

MENU

  1. HOLD FIRE BUTTON AND BUTTON TO ENTER MENU
  2. POWER: OR WATTAGE MODE.
    PRESS “ + ” OR “ – ” TO ADJUST WATTAGE IN O.5W INCREMENT WHEN IT’S UNDER 100W OR IN 1W WHEN IT’S OVER 100W. HOLD ” + ” OR ” – ” TO CAUSE THE WATTAGE TO SCROLL MORE QUICKLY. WHEN THE DEVICE IS STANDING BY. ALL VALUES DISPLAYED ON THE SCREEN ARE CALCULATED VALUES. WHEN FIRING THE DEVICE. THE VALUES WILL BE REAL-TIME VALUES.
    NOTE: RESISTANCE WILL ALWAYS BE THE REAL-TIME VALUE.
  3. VARIABLE VOLTAGE
    PRESS “+” DR “-” TO ADJUST VOLTAGE IN O.1V INCREMENT FROM
    1.0V TO 12.0V. HOLD “+” OR “-” BUTTON TO CAUSE THE VOLTAGE
    TO SCROLL MORE QUICKLY.
  4. TEMPERATURE CONTROL MODE (NI. TI. SS316)
    WHEN IN TEMPERATURE CONTROL MODE. PRESS OR HOLD “+” OR “-” BUTTON TO ADJUST TEMPERATURE. WHEN TEMPERATURE
    VALUE REACHES THE HIGHEST/LOWEST POINT IN CELSIUS DR
    FAHRENHEIT. PRESS “+” OR “-” AGAIN TO SWITCH FROM “℉” TO “℃”
    OR “℃” TO “℉”.
    TD ADJUST PRE-HEAT POWER IN TEMPERATURE CONTROL MODE.
    HOLD BOTH FIRE BUTTON AND “+” BUTTON FOR 1 SECOND.
    WATTAGE VALUE WILL START FLASHING. YOU CAN ADJUST THE WATTAGE BY PRESSING/HOLDING “+” DR “-” BUTTON.
    PRESS FIRE BUTTON TO CONFIRM SETTINGS OR STAY INACTIVE FOR 3 SECONDS TO SAVE SETTINGS.
  5. TCR MODE
    YOU CAN ADJUST TCR VALUE FROM 0.0010 ( 010 ON DISPLAY)
    TD 0.00999 (999 ON DISPLAY] FOR A MORE ACCURATE
    TEMPERATURE CONTROL VAPING EXPERIENCE.

6. STATS
STATS OR STATISTICS. ENTER THE “STATS” MENU. IT SHOWS YOU
HOW MANY PUFFS AND HOW MUCH TIME YOU VAPED THE DEVICE
SINCE LAST RESET. THERE ARE TWO OPTIONS IN THE SUBMENU.
TD RESET DR EXIT TO PREVIOUS MENU.

7. THE SCREEN WILL GO DIM AFTER 15 SECONDS OF INACTIVITY THE DEVICE WILL ENTER SLEEP MODE AFTER IBO SECONDS OF INACTIVITY. PRESS ANY BUTTON TO WAKE UP THE DEVICE.

8. CHARGING BATTERIES
PLUG MICRO USB CABLE TD CHARGE THE DEVICE. BATTERIES ICONS WILL INDICATE THEY ARE GETTING FILLED UP.

SAFETY FEATURES & WARNINGS

  1. BATTERY REVERSAL PROTECTION

2. SHORT-CIRCUIT PROTECTION: IF THERE IS A SHORT CIRCUIT. WHEN YOU PRESS THE FIRE BUTTON. THE SCREEN WILL DISPLAY “SHORTED”.

3. IF THE RESISTANCE OF THE ATOMIZER IS LOWER THAN 0.0D_Q. WHEN YOU PRESS THE FIRE BUTTON. THE SCREEN WILL DISPLAY “LOW O.”

4. OPEN-CIRCUIT WARNING: IF THERE IS NO ATOMIZER ATTACHED DR ATOMIZER HAS AN OPEN CIRCUIT. WHEN YOU PRESS THE FIRE BUTTON. THE SCREEN WILL DISPLAY “CHECK ATOMIZER”

5. OVERTIME PROTECTION: THE DEVICE WILL CUT POWER AFTER 10 SECONDS OF CONTINUOUS FIRING. SCREEN WILL DISPLAY “OVER 10S”

6. OVER-TEMPERATURE PROTECTION: IF THE BOARD TEMPERATURE GOES OVER 75°C/167°F. THE DEVICE WILL CUT POWER. WHEN YOU PRESS FIRE BUTTON. THE SCREEN WILL DISPLAY “TOO HOT”.

7. LOW-VOLTAGE PROTECTION: IF BATTERY LEVEL IS LOWER THAN 6.4V OR EITHER ONE OF TIIE BATTERIES HAS A LOWER THAN 2.9V VOLTAGE. WHEN YOU PRESS THE FIRE BUTTON. THE SCREEN WILL DISPLAY “LOW BATTERY”

WARNING:
IF YOU NEED TO INSERT THE BOTTLE BACK INTO THE DEVICE. PLEASE
KEEP THE DEVICE AT 90°ANGLE. OTHERWISE ELIDUID MAY GET
INTO THE INTERFACE OR BATTERY COMPARTMENT.

FIRMWARE UPDATE

CHECK YOUR FIRMWARE VERSION BY HOLDING “+” AND “-” BUTTONS FDR 2S WHEN THE DEVICE IS OFF.

GO TO THE FOLLOWING LINK TO CHECK IF THERE’S AN UPDATE AVAILABLE FOR YOUR TOPSIDE FIRMWARE.

HTTPS://WWW.DOVPOECIG.COM/TDPSIDE-DUAL-SQUONKER

FOLLOW THE INSTRUCTION ON THIS WEBPAGE TO UPDATE YOUR TOPSIDE FIRMWARE TO THE LATEST VERSION.

Related posts
Basic information of Aegis X Display Screen 2.4 inch OLED Color screen Power Output...
Thank you for choosing IJOY! Please read this manual carefully to ensure proper use. For additional information...
Thank you for choosing Teslacigs! Please read this manual carefully prior to using. We are no responsible...
For vapers who are looking for a lot of power in a small device the sub-ohm capacity, SMOK eGo Cloud...

Sharing is caring!