Lost Vape Therien DNA 75C INTRODUCTION


The Therien DNA 75C is the very first device that equipped the newest Evolv DNA 75C Color chipset. The color and smart settings of the DNA 75C board peers with the legend design of Lost Vape Therion made the Therion DNA 75C a more advanced device

The front of the Therlon DNA 75C is re-designed to adjust the needs of the Full Color TFT Screen and select button of DNA 75 Color. The device is features on board programmable multicolor LED, waterproof on board buttons, a real-time clock, ad」ustment buttons, and USB charging port

It is the customized user interface of the DNA 75 Color that impresses the Therion DNA 75C. This advanced feature makes the operation of Therion DNA 75C easy to maintain and operate. With theme designer software build in Escribe, the way of custoizat, on are endless, with 100% customisable user Interface.
In order to satisfy and spare vapers’needs and time, Lost Vape Therien DNA 75C provides preset profiles in Nickel(Ni 200), Titanium(Ti ),and Stainless Steel(SS)coil builds for ready to go

Therien DNA 75C STANDARD PACKAGE


1 x Therion DNA 75C Device
1 x Retractable USB Charging Cable 1 x Therlon Gift Box
1 x Therion USER Manual

Therien DNA 75C Mod MAIN FEATURES


• Powered by Evolv DNA75C Board
• Wattage Control/Temperature Protection
Full Color TFT Screen
• Theme Designer Software
• Customizable User Interface
• Escribe Software/Firmware Upgradable
• Onboard Programmable Multicolor LED
• Genuine Leather Battery Cover

• Ebony Wood/Carbon Fiber Inlays
• Die Cast Zinc Alloy Body
• Dual 18650 Parallel Cells
• Temperature Limit:200’F-600’F
• Output Power:1-75 Watts
• Stainless Steel 510 Atomizer Connector
• Integrated 1Amp On-board Balanced Charger
• Dimensions:90. 5mm•54mm•27mm

EVOLVDNA 7 Details


The DNA 75C is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It features Evolv’s patented Wattage Control, Temperature Protection, Preheat, Full Color TFT Screen, Reverse Polarity Protection, onboard programmable multicolor LED, waterproof onboard buttons and a real-time clock. The USB port, Evolv’s EScribe software and separate Theme Designer software can be used to fully customize all aspects of the interface or monitor the user experience. The DNA 75C features battery monitoring and integrated 1A charger.

Therien DNA 75C Vape Output Power


The following graphs show the output power range of the DNA 250C as a function of the coil resistance.

Escribe

Escribe is a software package used to configure, monitor and modify the operation if your DNA 250C. It installs on a Windows PC and connects to your DNA 250C using the USB port. Escribe has a separate manual and tutorial which can be found on Evolv’s site.

http://www.evolvapor.com/
http://www.evolvapor.com/manuals/EScribeManual.pdf

DISPLAY OF DNA 75C Display Instructions

The DNA 75C has a full color 80 x 160 px TFT screen.

Lost Vape Therien DNA 75C Mod ERROR MESSAGES


The DNA 75C will indicate a variety of error states.

Check Atomizer: The DNA does not detect an atomizer, the atomizer has shorted out, or the atomizer resistance is incorrect for the power setting.

Temperature Protected: The heating coil reached the maximum allowed temperature during the puff. If this happens, the DNA 75C will continue to fire, but will not be able to provide the desired wattage.

Ohms Too High: The resistance of the atomizer coil is too high for the current wattage setting. If this happens, the DNA 75C will continue to fire, but will not be able to provide the desired wattage. The Ohms Too High message will continue to display for a few seconds after the end of puff.

Ohms Too Low: The resistance of the atomizer coil is too low for the current wattage setting. If this happens, the DNA 75C will continue to fire, but will not be able to provide the desired wattage. The Ohms Too Low message will continue to display for a few seconds after the end of puff.

Too Hot: The DNA 75C has onboard temperature sensing. It will shut down and display this message if the internal board temperature becomes excessive.

Installing Battery: If using 18650, put the included battery adapter cap on the negative side of the 18650 battery, then place the 18650 battery into the device. If using 20700/21700, just place the battery into the device.

Therien DNA 75C Vape BATTERY INSTALLING AND CHARGING

External charging (Recommended): Remove battery from device. Follow charging instructions with using charger.

Internal charging: The DNA 75C has a built in 1A USB charger. It automatically detects the type of USB power supply it is connected to, so it can be plugged into standard PC USB ports or higher power chargers.

Download the manual:

Lost Vape Therien DNA 75C User Manual.pdf

Related posts
Mirage DNA 75C INTRODUCTION The Mirage DNA 75C is the first device that Lost Vape created to convert...
Drone BF DNA250C overview Drone BF DNA250C  Mod Standard Package 1 x Drone BF DNA250C...
What is Vaporesso Revenger X Kit? Revenger X is so immersive that the device itself disappears into the...
Orion DNA Go Manual Lost Vape Orion DNA GO is the world’s first Pod Mod equipped with the highly sophisticated...

Sharing is caring!

Leave a Reply

Your email address will not be published. Required fields are marked *