Mirage DNA 75C INTRODUCTION
The Mirage DNA 75C is the first device that Lost Vape created to convert 3 types of single batteries which are 18650, 20700 and 21700. The top and body of the Mirage DNA 75C are made with resin and wood hybrid material. This creative design of resin and wood combination gives Mirage DNA75C an unique and phantasmagoric appearance.
The front of the Mirage DNA 75C features a full color TFT screen display, onboard programmable multicolor LED, waterproof onboard buttons, a real-time clock, adjustment buttons, and USB charging port. Along with the smart DNA 75C chip, the frame is made of anodized aluminum which makes the devices extremely light weight, and the bottom battery sled is built as flip open function to simplify the vaping operation.
It is the customisable user interface of the DNA 75 Color that impresses the Mirage DNA 75C. This advanced feature makes the operation of Mirage DNA 75C easy to maintain and operate. With theme designer software build in Escribe, the way of customization are endless, with 100% customisable user interface. In order to satisfy and spare vapers’ needs and time, Lost Vape Mirage DNA 75C provides preset profiles in Nickel(Ni200), Titanium(Ti) and Stainless Steel(SS) coil builds for ready to go.
Mirage Mod MAIN FEATURES
Powered by Evolv DNA 75C Board Wattage Control / Temperature Protection Full Color TFT Screen Theme Designer Software Customizable User Interface Escribe Software / Firmware Upgradable Onboard Programmable Multicolor LED Stainless Steel 510 Atomizer Connector Anodized Aluminum Frame Resin-Wood or Resin-Only Body Single 18650/20700/21700 Convertible Flip-Open Battery Sled Temperature Limit: 200°F-600°F Output Power: 1-75 Watts Integrated 1Amp On-board Balanced Charger Dimensions: 43.5mm*28mm*93mm
Mirage DNA STANDARD PACKAGE
1 x Mirage DNA 75C Device
1 x USB Charging Cable
1 x Mirage Gift Box
1 x Mirage USER Manual
1 x 18650 Battery Adapter
EVOLV DNA 75C The DNA 75C is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It features Evolv’s patented Wattage Control, Temperature Protection, Preheat, Full Color TFT Screen, Reverse Polarity Protection, onboard programmable multicolor LED, waterproof onboard buttons and a real-time clock. The USB port, Evolv’s EScribe software and separate Theme Designer software can be used to fully customize all aspects of the interface or monitor the user experience. The DNA 75C features battery monitoring and integrated 1A charger. The following graphs show the output power range of the DNA 75C as a function of the coil resistance.
Specifications
Output Power
The following graphs show the output power range of the DNA 75C as a function of the coil resistance
Lost Vape Mirage ESCRIBE
Escribe is a software package used to configure, monitor and modify the operation of your DNA 75C. It installs on a Windows PC and connects to your DNA 75C using the USB port. Escribe has a separate manual and tutorials which can be found on Evolv’ssite. Users must go to the Escribe and update the latest firmware before using the device.
http://www.evolvapor.com/
http://www.evolvapor.com/manuals/EScribeManual.pdf
6. DISPLAY OF DNA 75C Display
The DNA 75C has a full color 80 x 160 px TFT screen.
Mirage ERROR MESSAGES
The DNA 75C will indicate a variety of error states.
Check Atomizer: The DNA does not detect an atomizer, the atomizer has shorted out, or the atomizer resistance is incorrect for the power setting.
Shorted: The atomizer or wiring are short circuited.
Weak Battery: The battery needs to be charged, or a higher amp rated battery needs to be used. If this happens, the DNA 75C will continue to fire the atomizer, but will not be able to provide the desired wattage. The Weak Battery message will continue to display for a few seconds after the end of the puff.
Check Battery: The battery is deeply discharged and needs to be charged, or is damaged. If this happens, the DNA 75C will not fire the atomizer. The Check Battery message will continue to display for a few seconds after attempting to fire the device. User should remove and replace the battery.
Lost Vape Mirage Mod Instructions
Temperature Protected: The heating coil reached the maximum allowed temperature during the puff. If this happens, the DNA 75C will continue to fire, but will not be able to provide the desired wattage.
Ohms Too High: The resistance of the atomizer coil is too high for the current wattage setting. If this happens, the DNA 75C will continue to fire, but will not be able to provide the desired wattage. The Ohms Too High message will continue to display for a few seconds after the end of puff.
Ohms Too Low: The resistance of the atomizer coil is too low for the current wattage setting. If this happens, the DNA 75C will continue to fire, but will not be able to provide the desired wattage. The Ohms Too Low message will continue to display for a few seconds after the end of puff.
Too Hot: The DNA 75C has onboard temperature sensing. It will shut down and display this message if the internal board temperature becomes excessive.
BATTERY INSTALLING AND CHARGING
Installing Battery: If using 18650, put the included battery adapter cap on the negative side of the 18650 battery, then place the 18650 battery into the device. If using 20700/21700, just place the battery into the device.
External charging (Recommended): Remove battery from device. Follow charging instructions with using charger.
Internal charging: The DNA 75C has a built in 1A USB charger. It automatically detects the type of USB power supply it is connected to, so it can be plugged into standard PC USB ports or higher power chargers.
Related posts
Where are the instructions?
Please read the article carefully.
I can not find proper instructions anywhere, only told what it can do but not how to do it, that is what you get out of the box. What to do for anyone who buys this and has not got a pc? I am not having a go just stating the fact, not everyone can just do it without some step by step basic instructions. Are there any printable instructions? Thanks, Jim.
Thank you, my friend!