Notice for Use
Thank you for choosing Eleaf Product! Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local agents, or visit our website: www.eleafworld.com
For more detailed instructions, please find tutorial video at: www.eleafworld.com/video/.
How to Use TESSERA Mod?
Power on/off: press the fire button 5 times in quick succession to turn on or turn off the device.
Vaping: keep holding the fire button to take a puff when the device is powered on. Please choose the correct mode and adjust the wattage to a proper range according to your atomizer before use.
Charging: the device can be charging through USB port via wall adapter or a computer.
Firmware upgrading: the firmware can be upgraded by connecting the device with a compouter through the USB via a USB cable.
General operations:
1. When the device is powered on, 3 quick clicks of fire button to enter main menu.
2. Press + or – button once repeatedly to select among (1) MODE, (2) SET, (3)INFO and (4)Colors, and press Fn button once to confirm your choice. Under their sub-menus, you can choose vaping mode, turn on/off certain function, change the color of the interface and so on in the same way (press +/- button to move or adjust and press Fn button once to confirm).
3. After settings are complete, just press the fire button once to go back to the main interface.
4. When the device is powered off, you’ll be able to have a look at the time simply by one click of the fire button.
Adjust wattage: in VW/RTC mode, the wattage can be adjusted directly by pressing +/- button. Keep holding +/- button to increase/decrease the wattage rapidly. In TC(Ni, Ti, TCR-M1/M2/M3)mode, you’ll need first move to SET-POWER and then press +/- button to adjust the wattage.
Adjust temperature: in TC(Ni, Ti, SS, TCR-M1/M2/M3)mode, simply press +/- button to increase/decrease the temperature setting.
Lock/Unlock + and – buttons: in power-on state, keep holding + and – buttons simultaneously to lock and unlock the buttons.
Other functions of the button: a) Quick switch of vaping modes: press and hold down the Fn button to make quick switch among POWER(VW), RTC(real time clock), TC-Ni, TC-Ti, TC-SS, TCR-M1, TCR-M2, and TCR-M3 modes. b) Turn on/off display: when the device is set in main interface in standby state, simply once click of Fn button to turn on/off the display. To turn off display in standby state helps save power and avoids unintentional clicks of + and – buttons.
Warranty
We are not responsible for any damages caused by human error. Legal warranty is applied.
Warnings
1. Please keep out of reach of children.
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.
Contra-indication
1. Do not attempt to repair the product by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged.
3. Do not use this product for other purposes except only for vaping and don’t swallow the e-liquid.
Possible Adverse Effects
1. This product may be hazardous to health and contains nicotine which is addictive.
2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.
How to use ELLO TS Atomizer
Assembling:
1. Drip a few drops of e-liquid directly into the atomizer head to make the coil(s) inside fully saturated before first use;
2. Screw the primed atomizer head onto the atomizer base tightly;
3. Put the glass tube on, and screw the top cap with mouthpiece on;
4. Slide the mouthpiece back to reveal the fill port, slowly fill e-liquid into the tank through the port, and then close the retractable top after filling;
5. The airflow can be adjusted by rotating the airflow control ring on the atomizer base;
6. Finally the ELLO TS is ready for use.
Warranty
We are not responsible for any damages caused by human error. Legal warranty is applied.
Warnings
1. Please keep out of reach of children.
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.
Contra-indication
1. Do not attempt to repair the product by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged.
3. Do not use this product for other purposes except only for vaping and don’t swallow the e-liquid.
Possible Adverse Effects
1. This product may be hazardous to health and contains nicotine which is addictive.
2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.
