Eleaf iStick Pico S with ELLO VATE
Notice for Use

Thank you for choosing Eleaf products! Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local agents, or visit our website at www.eleafworld.com.
For more detailed instructions, please find tutorial video at: www.eleafworld.com/video/.

How to Use?

Eleaf iStick Pico S MOD Overview

Power on/off: unscrew the battery tube, and remove the insulating piece from the 21700 battery if the package you purchased is the one that includes a 21700 battery. Then install a high-rate 21700 battery or a high-rate 18650 battery with the silicone battery sleeve into the battery tube and finally press and screw down the battery tube with battery onto the device. The device can be powered on/off by pressing the fire button 5 times.

Note:

1. Please be careful not to use battery with torn casing as it is a safety hazard.
2. Please make sure you are using high-rate 21700/18650 battery whose continuous discharge current is above 25A.
3. Please choose the correct mode and adjust the wattage to a proper range according to your atomizer before use.
Vaping: keep holding the fire button to take a puff when the device is powered on.
Charging: the 21700/18650 battery can be charged in the device through USB port via wall adapter or a computer or charged with an external battery charger. If the LED is set to be turned on, the LED on the device lights up for 5 seconds when you plug the device in to charge.
Firmware upgrading: the firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.

General Operations

1. Select vaping mode: when the device is powered on, you’re free to switch the vaping modes among VW, Bypass, TC-Ni, TC-Ti, TC-SS316, TCR-M1, TCR-M2 and TCR-M3 by first pressing the fire button 3 times and then pressing +/- button to choose a mode.

Adjust wattage: in VW mode, the wattage can be adjusted by pressing +/- button. Keep holding +/- button to increase/decrease the wattage rapidly. In TC (Ni, Ti, SS, TCR-M1/M2/M3) mode, first press the fire button 4 times in quick succession and then press +/- button to adjust the wattage.
Adjust temperature: in TC (Ni, Ti, SS, TCR-M1/M2/M3) mode, simply press +/- button to increase/decrease the temperature setting.

2. Other settings: press the fire button and + button simultaneously to enter set menu, and you’ll be able to lock/unlock coil in TC modes, choose a parameter to be displayed on main interface, set stealth on/off, turn on/off custom logo, choose the color of LED or turn it off, check firmware/hardware version of the device and check battery status, activate/deactivate preheat function in VW mode and set TCR value in TCR (M1/M2/M3) mode simply by pressing +/- button to move or adjust and pressing fire button once to confirm your choice. After settings are complete, just move to EXIT icon and click fire button once to confirm and go back to the main interface.
You can reset the counter of Puff/Time to zero by first moving to the submenu of Puff/Time and then keep holding down the + button.

Eleaf iStick Pico S Mod Setting

Warranty

We are not responsible for any damages caused by human error. Legal warranty is applied.

Warnings

1. Please keep out of reach of children.
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.

Contra-indication

1. Do not attempt to repair the product by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged.
3. Do not use this product for other purposes except only for vaping and don’t swallow the e-liquid.

Possible Adverse Effects

1. This product may be hazardous to health and contains nicotine which is addictive.
2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.

 

Notice for Use

Thank you for choosing Eleaf products! Please read this manual carefully before use so as to use correctly. If you require additional information or have questions about the product or its use, please consult your local agents, or visit our website at www.eleafworld.com.
For more detailed instructions, please find tutorial video at: www.eleafworld.com/video/.

Assembling:

Eleaf Vate Atomizer Overview

Vate Atomizer Refilling system

1. Drip a few drops of e-liquid directly into the atomizer head to make the coil inside fully saturated before first use;
2. Screw the primed atomizer head onto the atomizer base tightly;
3. Put the glass tube on, and screw the top cap with mouthpiece on;
4. Slide the mouthpiece back to reveal the fill port, slowly fill e-liquid into the tank through the port, and then close the retractable top after filling. If the atomizer you purchased is the EU version, you need to first rotate counterclockwise the retractable top 180 degrees and then slide the mouthpiece back to reveal the fill port; (Note: please don’t overfill.)
5. The airflow can be adjusted by rotating the airflow control ring on the atomizer base;
6. Finally the atomizer is ready for use.

Warranty

We are not responsible for any damages caused by human error. Legal warranty is applied.

Warnings

1. Please keep out of reach of children.
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, or persons who are allergic/sensitive to nicotine.

Contra-indication

1. Do not attempt to repair the product by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, otherwise it may be damaged.
3. Do not use this product for other purposes except only for vaping and don’t swallow the e-liquid.

Possible Adverse Effects

1. This product may be hazardous to health and contains nicotine which is addictive.
2. For people with adverse reaction after using this product, it is recommended to use the e-liquid with lower nicotine content or no nicotine.

Related posts
Load battery Step 1: remove the insulating piece. (if the package you purchased is the one that includes...
Notice for Use Thank you for choosing Eleaf products! Please read this manual carefully before use...
Notice for Use Thank you for choosing Eleaf products! Please read this manual carefully before use so...
Notice for Use Thank you for choosing Eleaf products! Please read this manual carefully before use so...

Sharing is caring!

Leave a Reply

Your email address will not be published. Required fields are marked *