VOOPOO Navi has high performance with an innovative triple airflow system and a powerful chip. Let’s know it from basic information.
Specification
Mod
Size & Weight: 9634.518.3mm
Battery: Built-in 1500mAh (Charging Period 1.5h)
Output Voltage: 3.2—4.2
Input voltage: 5V 1A
Capacity. 3.8ml(Standard Edition)/2ml(Eu Edition )
Resistance Range: 0.3ohm-2.0ohm
Operations Steps
1. Installation or Coll (illustration)
Pull out the atomizer and insert the coil from the bottom.
2. E-juice-refill operation
Pull out the pod;
pull out the rubber plug on the bottom and add a liquid through the slot. More than two-third is advised.
Press the plug back carefully and firmly.
Attention: For the first time using the coil, please place it for more than 5 minutes after filling coil.
3. Airflow adjusting (illustration)
Press the side adjustment button of the pod to achieve the proper inhalation experience.
Attention: Big air-flow channel should be adapted to high power output.
Operation instructions
1. On/off: Quickly press on the fire button five times.
2. Mode switching: Quickly press on fire button three times.
3. PUFF clear: Press the fire button and “-” button at the same time.
4. Clear the cumulative number of suction.
5. Enter the PUFF interface： Press the “+” and”-” button.
6. Exit the PUFF interface: Press and hold the fire button.
Note:
PUFF 0000
Record the suction number of the recent 14 days in total. Press “+” and”-” button to check the suction number of a certain day.
7. Lock/unlock Press “+” and”-“button at the same time. The product can not be fired when locked or adjust power.
8. Enter clock interface: Press “+” and “-“button at the same time.
Clock interface, short press on fire button to change cursor, “+” “-” button to settle time, press and hold fire button to save and exit.
Security Protection
- Overtime protection
- Over-temperature protection
- Output over-current protection
- Overcharge protection
- Low battery protection
- Atomizer short-circuit protection
- Max Power Protection
This is the end of the article, feel free to left your thoughts in the comment area.
Related posts
