There offering you some operations tips for Pasito II by Smoant.

Button function

Press fire button 5 times continuously to switch on/offthe device.

Press fire button 3 times to select Mode: VW, DVW,Bypass, NI, TI, SS, TCR and Color: White, Red, Orange,Green, blue, click left(-) or right(+) button to select, press fire button to confirm, hold fire button to return.

In TC mode, after installed atomizer, press fire button, it will display NEW+ SAME.

In VW/DVW Mode, after installed atomizer, it willauto-identify coil resistance and recommend wattage.

Working Mode

VW Mode:

In ww Mode, press right (+) or lef(-) buton to adjustwattage.

Press rgt(+) and left( ) button togethrto lockwattage and fire button.

DVW Mode:

In DVW Mode, press fire button and left (-) button toenter VW curve interface.

Press right(+) or left(-) button adjust wattage, press firebutton to confirm and adjust next level.

Hold fire button 1S to confirm and return.

In DVW Mode, press fire button and right (+) button toenter Time curve interface, click right (+) or left (-) buttonto adjust( 0.5-2S).

Hold fire button 1S to confirm and return.

TC Mode (Nl, TI, Ss):

After intalled atomizer, press fire button, the screenwill display NEW+ SAME-, new coil choose right (+)button, same coil choose left (-) button.

InAuto Mode, device will auto adjust attage by coilresistance.

Press fire and right (+) button to enter wattageinterface, press right (+) or left(-) to adjust wattage, clickfire button to confirm.

lf temperature is higher than 600F or lower than200″F, switch to Degrees of 100″C-300″C.

TCR Mode:

After intalled atomizer, press fire button, the screenwill display NEW+ SAME-, new coil choose right (+)button, same coil choose left (-) button.

Auto Mode, device will auto -adjust wattage by coilresistance.

Press fire and right (+) button to enter wattageinterface, press right (+) or left(-) to adjust wattage, clickfire button to confirm.

Press fire and left (-) button to enter temperatureadjust interface, click fire button to confirm.

If temperatureis higher than600″F or lowerthan200F,switch to Degrees of 100C-300″C.

This is the end of the post and thank you for watching!

Related posts
Notice for Use Thank you for choosing Eleaf products! Please read this manual carefully before use so...
Product Introduction: SINUOUS P80, a new flagship e-cig mod designed by sinuous designs, impresses...
Thank you for choosing UOY! Please read this manual carefully to ensure proper use. For additional information...
INSTRUCTIONS 1. GeneralCharging: After charging, the screen will display the startup animation.Power...

Sharing is caring!