There offering you some operations tips for Pasito II by Smoant.

Button function

Press fire button 5 times continuously to switch on/offthe device.

Press fire button 3 times to select Mode: VW, DVW,Bypass, NI, TI, SS, TCR and Color: White, Red, Orange,Green, blue, click left(-) or right(+) button to select, press fire button to confirm, hold fire button to return.

In TC mode, after installed atomizer, press fire button, it will display NEW+ SAME.

In VW/DVW Mode, after installed atomizer, it willauto-identify coil resistance and recommend wattage.

Working Mode

VW Mode:

In ww Mode, press right (+) or lef(-) buton to adjustwattage.

Press rgt(+) and left( ) button togethrto lockwattage and fire button.

DVW Mode:

In DVW Mode, press fire button and left (-) button toenter VW curve interface.

Press right(+) or left(-) button adjust wattage, press firebutton to confirm and adjust next level.

Hold fire button 1S to confirm and return.

In DVW Mode, press fire button and right (+) button toenter Time curve interface, click right (+) or left (-) buttonto adjust( 0.5-2S).

Hold fire button 1S to confirm and return.

TC Mode (Nl, TI, Ss):

After intalled atomizer, press fire button, the screenwill display NEW+ SAME-, new coil choose right (+)button, same coil choose left (-) button.

InAuto Mode, device will auto adjust attage by coilresistance.

Press fire and right (+) button to enter wattageinterface, press right (+) or left(-) to adjust wattage, clickfire button to confirm.

lf temperature is higher than 600F or lower than200″F, switch to Degrees of 100″C-300″C.

TCR Mode:

After intalled atomizer, press fire button, the screenwill display NEW+ SAME-, new coil choose right (+)button, same coil choose left (-) button.

Auto Mode, device will auto -adjust wattage by coilresistance.

Press fire and right (+) button to enter wattageinterface, press right (+) or left(-) to adjust wattage, clickfire button to confirm.

Press fire and left (-) button to enter temperatureadjust interface, click fire button to confirm.

If temperatureis higher than600″F or lowerthan200F,switch to Degrees of 100C-300″C.

This is the end of the post and thank you for watching!

Related posts
How to Use IJOY Captain PD270? How to power IJOY Captain PD270 on/ off? Press the fire button 5 times...
We believe that everyone is very familiar with Vapefly Kriemhild Kit. It is a limited edition of...
Intro Vape Forward Classic is a great box mod, and it was released by Wismec. The screen of the device...
Reuleaux RX2 21700 Overview Assemble and Disassemble: How to use: 1. Power on/off: Press...

Sharing is caring!