How to Use IJOY Captain PD270?

How to power IJOY Captain PD270 on/ off?
Press the fire button 5 times in quick succession to turn the device on and off. After switch on, OLED display Captain PD270 logo and software version number at stand by mode.
(Note: Please adjust the wattage to a proper range to match the atomizer you used before using.)

How to vaping?
While the device is power on, just keep pressing the fire button to vape.
(Firing timeout: 10 Seconds)
While the device is power on, the OLED screen default displays VW Mode.

How to set the TCR?
In the menu, switch to “TCR” mode indication, press fire button to confirm. Press fire button to choose between TCR M1, TCR M2. Press right/ left buttons to select certain parameter. After setup is completed, press fire button to switch to “EXIT”. Press right or left button to confirm.

How to cleat the puff value manually?
Press the fire button 3 times in 2s to enter the menu, choose “RESET PUFF” icon to enter the “PUFF rest” setting, press fire button to confirm your choice.

How to calibrate the resistance?
When the device connected with a new atomizer, press + and – button at the same time to calibrate the initial resistance of the new atomizer. We recommend to calibrate resistance in temperate control mode, you can make the temperature control more accurate, please note that this operation requires heating wire cooling to room temperature.

How to charge by USB?
When the voltage is lower than 3.3V, the display will show “Low Battery”, and then you need to charge the device, please connect the device through the USB cable to the computer or power adapter.
1. During the charging process, the battery energy column indicator will scrolling, when fully charged, it will stop scrolling.
2. During the charging process, the battery voltage is lower than 3.2V, the device is turned off.
3. Cannot vape during charging.
(If the device not be used for a long time, please charge every 30 to 60 days to make sure battery life.)

Related posts
Intro Vape Forward Classic is a great box mod, and it was released by Wismec. The screen of the device...
How to use? 1. Power on/off: Hold the mod and pull the magnetic cell cover to open. Put one 21700 or...
What is Vaporesso Revenger X Kit? Revenger X is so immersive that the device itself disappears into...
This device is water and dust resistant and was tested under conditioned. Laboratory conditions with...

Sharing is caring!

Leave a Reply

Your email address will not be published. Required fields are marked *