Thank you for choosing Eleaf products! Please read this manual carefully before use so as to use it correctly. If you require additional information or have questions about the product or its use, please consult your local distributors, or visit www.sourcemore.com
How to Use
Assembling:
1. Pull out the pod from the Just AIO battery.
2. Take out the GT coil from the box, drip a few drops of e-liquid directly into the GT coil to make it fully saturated before first use, and insert the primed GT coil into the pod.
3. Twist the rotatable ring to reach the fill port, slowly fill the pod with e-liquid and twist the ring back after filling.
4. Pull the pod back into the iJust AIO battery, and twist the whole pod section to get different airflow.
Power on/off:
5 quick Clicks on the button to turn on the device, and the indicator light around the button will flash 5 times to show the device is powered on. In the same way, it can also be powered off.
when the device is powered on, you will be able to select output power level among High, Medium and Low by 3 quick clicks on the button, and the indicator light will flash 3 times. The color of the indicator light indicates the power level you’ve selected,
After 2 quick clicks on the button, the indicator light will illuminate for two seconds to help you check the current power level according to its color.
Vaping:
Keep holding down the button to take a puff when the device is powered on. When vaping, the indicator light stays lit. the color of indicator light changes according to the remaining battery capacity.
Charging:
the device can be charged through Micro USB port via a wall adapter or a computer. The indicator light is red during charging and goes out when fully charged.
Properties and Protections
Resistance Range: 0.32-32
Over-time Protection: every time when vaping time exceeds 10 seconds, the indicator light will flash 10 times and the output cuts off automatically.
Short Circuit Protection: if short circuit occurs before vaping, the indicator light will flash 5 times and the output cuts off automatically when you start to vape; if short circuit occurs during vaping, the indicator light will flash 3 times.
Low Voltage Protection: when the voltage of the device is lower than 3.3V, the indicator light flashes 20 times and there is no output when vaping. Charge the device to reactivate it.
Related posts
