Tip: the devices itself wouldn’t indicate anything during updating process

Upgrade IJOY Mod Guide

1、 Take out the batteries
2、 Make USB cable connect the computer first
3、 Hold the fire button and then make USB cable connect your device
4、 Open updating Software, then you can see the computer indicate as below:
5、Click “choose” to choose the file for the device update,then you can see the computer indicate as below:
6、Finally, click “Update” to finish updating
Tips: Take out the batteries and make USB cable connect the computer first.
Then hold the fire button and make USB cable connect your device at the same time.

Can not find the corresponding product upgrade software?


If you can not find the corresponding product upgrade software, because the product upgrade software has not yet released, if you have any suggestions to upgrade the product, you can contact Livechat staff.

What if the device cannot turn on after upgrading? Or failed to upgrade?


If the device cannot turn on after upgrading, firstly, please take out the cells, wait for a few minutes, then install the battery.
If you failed to upgrade, you can also change other USB cables or computers for a try.
Tips:1. All upgrade software only applies to windows7 system
2. The software can be upgraded repeatedly

Related posts
Thank you for choosing IJOY! Please read this manual carefully to ensure proper use. For additional information...
Thank you for choosing IJOY! Please read this manual carefully to ensure proper use. For additional...
Thank you for choosing IJOY! Please read this manual carefully to ensure proper use. For additional...
Speeder mod specifications Wattage range: 1-200W Output Voltage: 0.1-8.4V Resistance Parameters:...

Sharing is caring!

Leave a Reply

Your email address will not be published. Required fields are marked *