How to use:

1. Take off the bottom cover and side cover of the device to take out the e-liquid bottle.
2. Fill the e-liquid into the bottle slowly. (Note: Please do not overfill.)
3. After filling, insert the bottle into the device again, then put the bottom and side covers back.

Power on/off:

Take off the side cover and put one high-rate 18650 cell into the device. Press the fire button 5 times in quick succession, the button light will flash 5 times to indicate LUXOTIC BF BOX is ready for use. In the same way, it can be turned off after 5 presses. (Note: Please be careful not to use battery with torn shell for safety.
Vaping: Press the fire button and inhale.

Warranty

Please consult with your WISMEC distributors for warranty policy. We are not responsible for any damage caused by user error.
This warranty is only valid for authentic WISMEC products within warranty period from date of purchase by the end user.

Warning

1. Keep out of reach of children.
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, persons who are allergic/sensitive to nicotine.

Contra-indication

1. Only have your product repaired by Wismec. Do not attempt to repair the unit by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, as this may damage the product. The appropriate operation temperature is within 0°C to 45°C while charging and -10°C to 60°C while in use.
3. Keep away from water.

Possible adverse effects

1. Use of this product may cause damage to health.
2. For people with adverse reaction after using this product, it is recommended to use the juice with lower nicotine content or no nicotine.

Related posts
LUXOTIC MF Box Overview Squonk mode How to use LUXOTIC MF Box Kit? 1. Remove the back cover...
How to use: 1. Power on/off: Push forward the battery cover and put two high-rate 18650 cells into...
How to Use Wismec LUXOTIC NC: Power on/off: Push the bottom cover and take it away, put two 20700...
How to use Wismec CB-80: 1. Power on/off: Push forward the battery cover and put one high-rate...

Sharing is caring!