Hiflask is a Starter Kit from WISMEC. It has a 2100mAh internal battery and comes with a brand new atomizer structure. What kind of vaping experience does this device bring with a retro mechanical airflow control system? Let’s get to know this product together and discover the fun it brings

How to Use Wisemec Hiflask Vape Kit

Hiflask Overview

Wisemec Hiflask Vape Kit ocerviews

How to Use Wismec Hiflask Vape Kit

Power on/off:  Press the fire button 5times in quik succession, the button light will flash 5 times to indicate Hiflask is ready to use. In the same way, it can be turned off after 5 presses.

Soak the JVUA coil: Take out the JVUA coil and drip a few drops of e-liquid into it.

E-liquid filling: Open the lid and inject the e-liquid through the filling hole into the cartridge.
(Note: Please don’t fill too much to aviod overflow.)

Hiflask how to refilling e-juice

Vaping: Insert the JVUA coil into the cartridge and then put the cartridge into the battery. Press the fire button to inhale, realse to exhale.
JVUA coil relacement:
Pull out the cartridge and take out the JVUA coil to replace or clean.
(Note: Please do not wash the atomizer head with water. Just clean it with cotton or dry cloth.)

Pull out the cartridge and take out the JVUA coil

Adjustment of air inflow: By rotating the airflow control swith clockwise or counterclockwise, you can adjust the airflow and get different vaping experience. When the swith is in the horizontal direction, the airflow is maximum,. And when the swith is in the vertical direction, the airflow is minimum.

Hiflask airflow control swith

Charging:Simply charge the Hiflask bu connecting it with a computer or a wall adapter via USB cable. The indicator light will keep in red while charging and go out when it is fully charged.

Functions:

Short-circuit protection:
1.When the short circuit occurs before working, the button light flashes for 5 times and then power off.
2.When the short circuit occurs while working, the button light flashes for 3 times(reset).

Atomizer protection: Hiflask has 10 seconds run time protection. The light will flash 10 times if the fire button is pressed for more than 10 seconds.
Low voltage protection: When the battery voltage drops lower than 3.3V, the button light flashes for 40 times and the device will power-off. Then please charge the device to power the device back on.

Resistance test:
(1) When the resistance at the output end is larger than 3.0ohm, the light flashes slowly for 10 times if you press the button.
(2) When the resistance at the output end is lower than 0.3 ohm, the light flases quickly for 3 times, suggesting the resustance is too low or protential short circuit.

Battery display function: The light will stay lit or flash slowly when battery quantity is high. On the contrary, the light will flash in frequency.

 

Hiflask battery indicator

 

Warranty

Please consult with your WISMEC distributors for warranty policy. We are not responsible for any damage caused by user error.
This warraty is only valid for authentic WISMEC products within warranty period fron date purchase by the end user.

Warning

1. Keep out of reach of children.
2. This product is not recommended for use by young people, non-somker, pregnant or breast-feeding women, persons who are allergic/sensitive to nicotine.

Contra-indication

1.Only have your product repaired by WISMEC. Do not attempt to repair the unit by yourself as damage or personal injury may occur.
2.Do not leave the productin high temperature or damp conditions, as this may damage the product. The appropriate operation temperature is within 0℃ to 45℃ while charging abd -10℃ to 60℃ while in use.
3.Keep away from water

Possible adverse effects

1. Use of this product may cause damage to health.
2. For people with adverse reaction after using this product, it isrecommended to use the juice with lower nicotine content or no nicotine.

 

You may want to find:

How to Use Wismec LUXOTIC NC Kit – User Manual

How to Use Wismec LUXOTIC MF Box Kit Guillotine V2 RDA User Manual

How to use Wismec Active Starter Kit Amor NS Plus Tank User Manual

How to Use Wismec LUXOTIC DF BOX Mod – User Manual

How to Use Wismec Sinuous Solo Kit – User Manual

How to Use Wismec Motiv 2 AIO Vape Kit – User Manual

How to Use Wismec Bellerophon Atomizer – User Manual

How to Use Wismec CB-80 Vape Kit – User Manual

How to Use Wismec Hiflask Vape Kit – User Manual

 

Related posts
How to Use Wismec Motiv 2: E-liquid Filling: Take out the cartridge and open the stopper, inject...
How to Use: Power on/off: Press the fire button 5 time in quick succession, the indicator light will...
LUXOTIC MF Box Overview Squonk mode How to use LUXOTIC MF Box Kit? 1. Remove the back cover...
The Wismec Vicino is a mechanical mod, and powered by single 18650 battery. It features a spring-loaded...

Sharing is caring!