How to fill the pod

a. Install the coil to the pod.
b. Plug the pod in the body.
c. Remove the drip tip.
d. Fill the e-liquid into the pod through the fli hole.
e. Put the drip tip back on the pod.

Attention:

a. When installing the coil, please press the coil to the is installation hole and ensure it’s securely connected.
b. Add e-liquid from the fill hole, do not cover the air outlet on the other end.
c. Do not leave the drip tip-off for an extended period. Install drip tip back securely after refling to prevent leakage.
d. When using a new coll, please let the pod sit for 10 minutes to avoid coil burning.
e Please add e-liquid when the e-liquid level is at the “MIN line.

Airflow adjustment

a. Remove the pod from the body.
b. Rotate the airflow ring to adjust the airflow.
c. Put the pod back to the body.

Replacing coil

a. Remove the pod from the body.
b. Pull out the coil from the pod.
c. Install a new coil to the pod.

Attention

  1. After filinig e-liquid, please let the pod sit for 10 minutes to avoidcoil burning.
  2. Please check if O-rings on the coil are intact and installedcorrectly to avoid leakage.

Cleaning the e-liquid tank

a. Remove the pod from the body.
b. Pull out the coil, and remove the drip tip (the coil can not becleaned.)
c. Clean the e-liquid tank with clean water, and install the coil anddrip tip back on after drying it.
(Note: Please check if O-rings on the coil are intact and installedcorrectly to avoid leakage.)

How to use

Power on/off

Click the fire button 5 times in 2 seconds to turn
on/off the device. The screen will display “HELLO
UWELL” or “Goodbyel”.

Standby

The device will enter the standby mode if there is no operalionwithin 8 seconds.

Vaping time

The device will automatically stop firing when thebutton is held for longer than 8 seconds then thescreen will display “OVER 8s”.

Lock/Unlock

a. Hold the fire button and “- button for 1second to lock/unlock all the buttons.
b. Hold the fire button and “+ button for 1second to lock/unlock “+” and – buttons.

Wattage adjustment

a. In standby mode, press the “+t/- to adjust the wattage or hold the button to scroll through them faster. It will round-robin.
b. The waltage range of the 0.23Q col is 5W- 60W.The waltale range of the 0.8Q coil is 5W- 30W.

For more vape information or discounts, please visit www.sourcemore.com

Related posts
KOKO Prime Kit is a top refilling pod system kit that is known as an upgraded version of Uwell...
As you know, Caliburn G Kit is the upgrade version of Caliburn, and it will continue its high performance...
Illustration Please read the following information before use: 1. Install the coil into...
User Instruction Coil Installation Make sure the cartridge is empty before installing the...

Sharing is caring!