Illustration
Please read the following information before use:
1. Pull out the pod cartridge
2. Instill through e-juice inlet and allow the coil to soak for 10 minutes after the first filing.
Instructions
1. How to fill the pod
a. Pull out the pod cartridge from the body.
b. To still push e-juice inlet to start filling.
c. Install the pod cartridge into the body.
Attention
a. Reach inside the container with e-juice bottle nozzle when filling.
b. To avoid dry-burning, please wait for 10 minutes after the first e-juice top-up.
c. Please refill immediately when e-juice level reaches the refill mark.
2. Vaping
The device will start working with drawing, and the LED indicators will be on along while the device is working. The maximum working time is 8 seconds with each draw as protection. In the case of exceeding 8 seconds of continuous drawing, the device will cease working, while the LED indicators will flash in green 5 times as a prompt.
3. Instructions for replacement of pod cartridge
Take out the old pod cartridge from the body and insert the new one.
Attention
Allow the coil to soak for 10 minutes after the filling before use.
4. Tri-power feature
To experience different flavoring, simply do the following:
a. Align the liquid inlet with the logo plate then insert the pod, one green arrow will flash 3 times to indicate that the device will be running in minimum power mode.
b. Align the “II” Mark and insert the pod, two green arrows will flash 3 times to indicate that the device will be running in medium power mode.
c. Align the “II” Mark and insert the pod, three green arrows will flash 3 times to indicate that the device will be running in maximum power mode.
Attention
a. in case of insufficient power for high power mode, the device can still be run in medium power mode.
b. In case of insufficient power for medium power mode, the device can still be run in low power mode.
5. Battery indication function
The LED will flash green to signal the remaining battery capacity is over 60%; blue to signal 30%-60%; red to signal below 30%; 10 times of red flashes upon battery depletion.
6. Short circuit protection
In the case of short-circuit, the indicators will flash red 3 times and stop working.
7. Low voltage protection
The indicators will flash red 10 times and stop working if the battery is depleted.
8. Timeout protection
The maximum working time is 8 seconds with each draw’s protection. In the case of exceeding 8 seconds of continuous drawing, the device will cease working, while the LED indicators will flash in green 5 times as a prompt.
9. Open circuit prompt
When the pod cartridge is not properly connected or not connected, the LED indicators will flash blue 3 times to signal the open circuit.
10. Charging
While charging, the indicators will flash to signal power level: green to signal battery level Is charged over 60%; blue to signal 30%-60%; red to signal below 30%; indicators will stay on upon charge completion.
Deal: ☟ Grab an extra 38% OFF after applying the code “WHIRK”
Related posts
