Congratulations on your purchase of the VOOPOO Drag 5 Kit! This manual will guide you through the features, functions, and usage of your new vaping device.
Steps
Step 1: Install the coil
Unscrew the base, then insert the coil from the bottom of the tank.
Step 2: Fill the atomizer with e-liquid
Push the top cap, and fill e-liquid from the filling port, then it’s recommended to keep thee-liquid tank two-thirds full.
Step 3: Start to use the device
Let the coil saturated for about five minutes and you are free to use the device. You can adjust the airflow and power to enjoy an optimal vaping experience.
Interface Introduction
1. Turn on/off the device:
-Toggle multi-function switch (When the multi-function switch is set to “On/Off device”)
-Press the fire button five times quickly
2. Lock/Unlock power:
-Toggle multi-function switch (When the multi-function switch is set to “Lock 1Unlock device”)
-Press the fire button three times quickly (When the multifunction switch is set to “on 1 off device”)
3. MENU: Press the “+” and “-” buttons at the same time to enter the menu, use the”+” or “-“to select options, and press the fire button to confirm.
4. Mode setting: After entering the setting interface, select the “Mode” option, then select the mode of the device on the sub-interface:
SMART: This mode can identify the best power and prevent the coil from burning due to high power while using,
RBA: User- User-customizable power adjustment from 5 W-177 W.
ECO: The device enters power-saving mode to save battery life.
TC:
a)Support three kinds of heating wire: NI200, TI, SS316, SS430
-TC adjustable range: 200-600 F/100-315 C
b)Press the fire button and the “-” button at the same time to choose “C” or
c)Press the fire button and the “+” button at the same time to adjust the power from 5 W-80 W.
d)Recommended resistance value range for TC mode: 0.05 Q-3.0 Q
5. Multi-function switch setting: After entering the setting interface, select the”Switch” option, and select the function of the switch in the sub-interface:” Tum on/off the device” or “Lock/unlock the device” or “Lock/unlock the power “.
6. Colour: Choose UI color.
7.BAT EVAL.: Users can use this function to evaluate battery performance.
8. PUFF RESET: PUFF data will be cleared.
9. THEME: Users are free to choose whether they want flame vaping animation or not.ewe
10. About Device: Display device information.
11. Charging: Support charging with 5 V/3A. It is recommended to use the Type-C cable provided by VOOPOO to charge the device. 
12. Software upgrade: Consumers have access to upgrade the software to the latest version on VOOPOO official website
(www.voopoo.com), which requires the specific Type-C cable to connect VOOPOO product to the computer. Please keep your device fully charged.
13. Status notification
Battery Installation
1. Push the smart leather cover.
2. Install the prepared 18650 battery from the bottom correctly with an electrode indication. (it is recommended to use a high-rate battery, with a discharge current 230 A.)
3. Close the smart leather cover.
Safety ProtectionOvertime Protection
Overheating Protection
Short-circuit Protection
Output Over-current Protection
Low Battery Protection
Anti-reverse Battery Protection
Overcharge Protection
Precautions for Daily Use of Leather
1. Please try to avoid scratches by sharp objects or direct friction against articles.
2. Please try to avoid the leather surface contacting with corrosive substances such as acids and bases, or alcohol or alcoholic liquids from coming into contact with the leather surface.
3. Please use a soft cotton cloth to clean the dirt on the leather surface.
4. Avoid being exposed to sunlight for a long time.
Notes
1. This product is not recommended for minors, non-smokers, pregnant or breastfeeding women, or anyone at risk of heart disease, depression and asthma.
2. Please keep the device away from heat, fire and water. This device should be stored in a cool and shady environment,
3. Please do not drop, throw or immerse the device in the water.
4. Please turn off or lock the device to avoid accidental firing when you carry it out
5. Please rationally use the device according to your personal situation.If discomfort occurs, please stop using it immediately.
6. EEE Recycling: This product should not be treated as household waste, Instead it should be taken to the collection place for the recycling of electrical and electronic equipment.
7. Battery Recycling: The product battery should not be treated as household waste. Instead, it should be taken to the used battery collection place for recycling.
8. It is recommended to use the Type-C cable provided by VOOPOOtocharge the device,
9. During the long-term unused period of the device, it is recommended to charge regularly to prevent discharge!
10. The storage period of the equipment shall be within 3 months. The ambient temperature ranges from -5 c -30 c, with humidity 25% t 75% RH.Operating temperature of the electronic cigarette:0 C-40 C!
11. Disassembly is prohibited after product failure!
12. Only for indoor charging, please use a UL-certified USB charger to avoid the danger of fire and explosion!
Warm Prompt
Atomizer Leakage
There is a possibility of e-liquid leakage at high pressure when you travel by air. Therefore, please keep your device away from other important objects. Deal with Condensate.
There may be slight condensation due to the difference between indoor and outdoor temperatures when you use the device. It is advisable to take out the atomizer and shake it downwards.
