Notice for Use:
Thank you for choosing Joyetech. Please read this user manual carefully before use to ensure your usage is correct. If you require ay addition information or have any questions about the product or its use, please consult your local Joyetech agent, or visit our website at www.joyetech.com.
1. Scratch off the coating of the SC label on the package, you’ll see the security code with 16 numbers.
2. Visit http://www.joyetech/bachcode.php and enter the numbers in sequence(left to right, up to down) without blanks to check
3. Should you have any further question, please feel free to contact email@example.com
Size: 48.0mm (L)*33.0mm (W)*89.0mm (H)
Screen: 0.96-inch OLED
Mode: VW/TC(Ni, Ti, SS)/ TCR
Battery: 2*18650 cells(CDR≥25A)
Max charging current: 2.0A
Max output current: 50A
Max output voltage: 9V
How to Use
1) Please make sure you’re soaked the atomizer head properly and filled the tank with enough e-liquid before use.
2) Please always use high rate 21700/18650 cells with continuous discharge current rating (CDR)≥25A.
3) Please pay attention to the positive and negative signs when installing the cells. Use the battery sleeve when you want 18650 cells.
4) Do not use cells with torn casings for safety reasons.
2. Power on/off
Put the device upside down. Press and push the battery cover to open the lid. Put one 18650 battery inside and push the cover back. Press the fire button 5 times in quick succession to tum the device on or off.
Hold the fire button and inhale through the mouthpiece. Release the fire button and exhale. Please choose the correct mode and adjust the wattage to a proper range according to your atomizer before use.
Hold the fire button and inhale through the mouthpiece. Release the fire button and exhale.
4. Switch Modes
Click the fire button 3 times in quick succession to enter the menu system. Click the fire button again and switch the modes by clicking “+”/”-” buttons,
Click the fire button to confirm your setting.