Thank you for choosing GEEKVAPE
Please read the user manual before using this product for better user experience.
Keep the user manual for future reference
Overview
Product Features
Powered by the advanced AS-80 chipset
Built-in battery of 2200mAh
Power from 5W to 80W
Accurate TC for SS, Ni, and Ti
Contents
1 x Aegis Mini Mod 1 x Promotion card & warranty card
1 x User Manual 1 x USB Cable
Product Parameter
Supporting general coil and three kinds of temperature-controlled
Coil: Nickel 200(Ni)/ Titanium (Ti)/ Stainless steel(SS)
Input voltage: 3.2V (±0.1V)-4.2V(±0.1V)
Output voltage: 0.7V-8V
Output power:5W-80W
Temperature control: 100℃ – 315℃/ 200℉ – 600℉
Resistance range: 0.05ohm-3.0ohm
Battery specification: Built-in battery
Working temperature: -10~40℃
Fully charge voltage: 4.2V±0.05V
Charger specification: 5V 2A
Main parameters
Instructions
1. Turn on: Press the fire button five times in quick succession to turn on the device
2. Turn off: Press the fire button five times in quick succession to turn off the device
3. Power adjustment: In the PWR mode, press the “+” or “-” button to adjust the power, and long press and hold the button to enter the quick adjustment mode.
4. Temperature Control: In the working mode (Ti, Ni, SS and TCR), press the “+” or “-” button to adjust the temperature, and long press and hold the button to enter the quick adjustment mode.
When the temperature reaches the maximum or minimum, increasing or decreasing the temperature again will switch between Fahrenheit/Celsius.
5. Entering the settings: Press the fire button 3 times in quick succession to enter the setting menu.
6. Exiting the settings: Press and hold the fire button for 0.8s to exit the setting state (device will automatically exit the setting mode after 5s of inactivity in the setting mode).
7. Switch working modes: Press the fire button three times in quick succession to enter the settings menu.
PWR, NI, SS, Ti, TCR, VPC, BY.
Use the “+” or “-” button to toggle working modes; available operating modes include: PWR, Ni, SS, Ti, TCR, VPC, BY.
8. Clearing and resetting the puff counter: Press the fire button to toggle the cursor to puff value;
Press the “+” button to clean the puff value;
Press “+” button again to restore the puff value.
9. Charge TCR parameter: Press the fire button three times to in quick succession to enter the settings menu;
The cursor stays at the working mode, press the “+” or “-” button until the TCR working mode is selected.
Press the fire button to toggle the cursor to the TCR mode;
Press the “+” or “-” button to adjust the TCR parameter, long press and hold the button to enter the quick adjustment mode.
10. Charge VPC parameter: Press the fire button three times in quick succession to enter the settings menu;
The cursor stays at the working mode, press the “+” or “-” button until the PVC working mode is selected.
Press the fire button to toggle the cursor to the P1;
Press the “+” or “-” button to adjust the P1 power value and long press and hold the button to enter the quick adjustment mode.
Continue to press the fire button to toggle the cursor to the P2, P3, P4, P5;
Press the “+” or “-” button to adjust the P2, P3, P4, P5 power value, and long press and hold the fire button to enter the quick adjustment mode.
11. Lock or Unlock: Long press “+” and “-” buttons simultaneously for two seconds to lock or unlock screen, during the locked state device can still be turned off by pressing fire button 5 times in quick succession, device will return to the last state when turned back on.
Prompts and Protection
Short circuit prompt
High resistance prompt
Low Voltage prompt
Device overheating prompt
No atomizer prompt
10s Cut-off
Lock screen prompt
Battery weak prompt
Anti-dry prompt (Temperature control mode)
Attention
Product is not intended for use by pregnant women and children under the age of 18
Keep away from fire
Avoid impact
Service in China
Website: www.geekvape.com
Add: Xingye Rd. #3012, Bao’an District, Shenzhen, China
Available: Mon-Fri, 9AM to 6PM CST
Service in the USA
Website: www.geekvape.com
Add: 637E Big Beaver Rd STE 211, Troy, Michigan, 48083 USA
E-mail: service@geekvapeusa.com
Available: Mon-Fri, 9AM to 5PM EST
Anti-Counterfeiting Query
Visual Method
① Sway the label under light lightly
② Logo will expand gradually to curved shape with the different viewing angle
Website Authenticity Check
① Go to www.geekvape.com and scroll right to the bottom of the main page.
② Scratch the code and enter the 12 digit security numbers on the blank field.
③ Click on the “Go” Button and a pop up window should appear confirming if your product is authentic.
Geekvape User Manual:
How to Use Geekvape Aegis Legend Kit – User Manual
How to Use Geekvape Aegis Mini Mod – User Manual
How to Use Geekvape Nova Kit – User Manual
How to Use Geekvape Athena Kit – User Manual
How to Use Geekvape Blade Kit – User Manual
How to Use Geekvape GBOX Squonk Kit – User Manual
How to Use Geekvape Tsunami Mesh Kit – User Manual
How to Use Geekvape Mesh Pro Kit – User Manual
How to Use Geekvape Alpha Sub-Ohm Tank – User Manual
How to Use Geekvape Loop RDA 1.5 – User Manual
Related posts
Hello
I’ve had my kit for a month and it’s stopped charging. Any help?
not helpful – e.g what does puff value mean? No explanation of terms or effect of settings.
Mine started to burn funny. Ive changed out everything and still no luck… Any advice. It taste horrible